LHC5028 Z-Wave DIN-rail module w. 16A relay outputs

LHC5028 is a 6 channel Z-Wave controlled DIN mountable module. The module is equipped with 6 relay switches and 6 digital inputs for mounting on a standard M36 DIN rail (EN50022).

The 6 independent relay switches can freely be controlled from the Z-Wave network and be used for many different purposes. Furthermore, the relay switches are able to be directly controlled by the 6 digital inputs.

The 6 digital inputs can be connected to dry contacts, e.g. limit switches, door/window contacts, push-buttons. Or they can be connected to open-collector outputs from discrete sensors, e.g. PIR sensors, etc.

LHC5028 can be used for controlling AC and/or DC loads. Each relay switch are rated for loads of up to a maximum of 16A.

All 6 relay switches are galvanically isolated from each other.

The 6 inputs in LHC5028 is able to function as a scene controller and activate predefined scenes in other Z-Wave devices or controllers (by transmitting Central Scene notifications).

LHC5028 must be supplied from a 10 – 24Vdc power supply.

Initiation of Z-Wave inclusion and exclusion is fulfilled by activation a push-button through a little hole in the front of the module.

LHC5028 is equipped with a LED in the front of the module for different kinds of status indications.



Technical data:

Dimension:  H 85 mm x W 105 mm x D 60 mm (M36 6 module) 
Power supply: 10 - 24Vdc
Screw terminals:

Outputs: 6 x 2 terminals (10mm clearance).
Inputs: 4 terminals on top, 6 terminals on bottom.

Power consumption: 0,6W (idle) + 0,5W pr. active relay (max. 4W).
Radio protocol: Z-Wave: EU 868.4MHz – 500 Series
Radio range: 40 m indoor / 80 m outdoor
Outputs: AC1: 16A 250V AC
AC3: 750W (engine)
AC15: 360VA
Max. inrush current: 80A/20ms
Inputs:  For use with dry contacts or open-collector outputs.
Input impedance: 22kOhm.
Z-Wave Plus Certification Number:  

Order information:

LHC5028 DIN rail universal module, 6x16A switches, 6 digital inputs.


Product photos: